ViaSampling System
ViaSampling System
ViaSampling System
High-precision coupon extraction and preparation in a few, simple steps
ViaSampling System
- Custom-designed for the Printed Circuit Boards (PCB) industry
- Representative samples from most board types, rigid and flex
- Guaranteed, repeatable results – no lost samples
- High-precision preparation of microvias down to 100 μm
- System precision better than ± 20 μm
- Minimum preparation costs
- Continuous routing feature for highest productivity
The Struers ViaSampling System consists of two parts: ViaSampler ViaSampler is a dedicated, fully automatic coupon extraction station with a precision router-cutter (milling tool) for drilling two positioning holes anywhere on the board and extracting 10 x 20 mm test coupons. ViaKit ViaKit is a toolkit that includes all you need for pinning, mounting, and preparing coupons, making your coupon preparation process much easier. It is designed for high-precision preparation of up to 36 coupons at a time and is used along with ViaSampler. An entry-level version of ViaKit is also available.
Benefits
High precision
With a system precision better than ± 20 μm, Struers ViaSampling System ensures the required precision in every step of the coupon preparation process. The stainless steel ViaMount molds keep the sample 100 percent dimensionally stable during curing. The lower part of the mold stays on the sample after curing, locking it into the sample holder, thus ensuring maximum precision.
High Productivity
Drilling and routing are carried out automatically in a single operation, without the need for a tool change. ViaInserter enables accurate positioning of up to six coupons on one set of pins, enabling high-precision preparation of up to 36 coupons at a time. The advanced vision system enabled quick and accurate pinpointing of test coupons with an on-screen magnification of up to 200 times.
Easy to use
Preparation is calibration-free, using factory-calibrated diamond stops. The simple, predefined preparation process ensures well-defined removal through an easy three-step method that may be expanded according to user requirements.
Used in these industries:
- Automotive
- Aerospace
- Electronics
- Manufacturing
- Education & Research
KEY FEATURES FOR ENSURING HIGH PRECISION
-
Dedicated coupon extraction station
Extract coupons at your convenience. For QC-Lab installation, independent of production
-
Low impact extraction
Minimum deformation + thermal load
-
Large, high-precision routing table
Extract coupons from anywhere on the board
-
Two cameras with zoom function
Coarse and ultra-fine pinpointing using 5x/10x/100x and 200x magnification
-
AutoTrack
The routing table follows your movement. New position is automatically tracked/followed.
-
Dedicated Router-cutters
High precision Router-cutter for ViaSampler
-
Combined drilling and routing
Simplicity, fewer buttons
-
Flexible positioning of coupon
Mirror or slide coupon sideways
-
Handles most board types
For unmounted boards up to 21" x 24" x 0.23. Rigid, flex
-
Dynamic, on-screen measuring system
Dynamic measuring of via diameter
-
Prepared for easy connection to external exhaust system
Dust can efficiently be removed during drilling.
-
ViaInsert
Precise positioning of pins. Unmounting easy Up to six coupons on one set of pins.
-
ViaMount
100% dimensionally stable. Unmounting facilitated. Works like a click-lock on the sample holder.
-
ViaHolder
Stops material removal at pre-defined level. Do not wear, not even on diamond surfaces. The same coupling as other Struers sample holders. Preparation of up to six molds at a time, with up to six samples in each. Ensures well-defined removal.
Facts
Model types
ViaSampling System
Routing station for extraction of PCB test coupons.
Industrial PC with video capture card and three router-cutters included.
Router-Cutter
Router-cutter tool for ViaSampler, 1.98 mm dia.
Router-cutter tool for ViaSampler, 1.96 mm dia.
Router-cutter tool for ViaSampler, 1.97 mm dia.
ViaKit
Toolkit for preparation of PCB coupons, complete
with pin inserter, specimen holder,
mounting rings, end caps, positioning pins, silicone oil, and cleaning tool
ViaKit Basic
Toolkit for preparation of PCB coupons, complete with ViaHolder. Single sample specimen holder, pin inserter
Mounting rings, end caps, positioning pins, silicone oil, and cleaning tool
ViaInserter
For insertion of two positioning pins in up to six coupons
ViaHolder
Adjustable precision specimen holder with diamond stops.
For up to six times six PCB coupons.
ViaHolder single sample
Adjustable precision specimen holder with diamond stops.
For up to six coupons in a single mount.
ViaKit Mounting Rings
Stainless steel precision mold with non-stick lining.
For use with ViaKit End Caps (40300056). Six pcs.
ViaKit End Cap
End caps for use ViaKit Mounting Rings (40300055). 250 pcs.
ViaKit Positioning Pins
Positioning pins, 1.98 mm dia., length 43 mm. 500 pcs.
ViaKit Cleaning Tool 40300075
Cleaning tool for ViaKit Mounting Rings
Silicone Oil
Silicone release agent
Technical Data
ViaSampling System Technical Data Sheet
Struers Technical Data Sheets are designed to help you make the best choice of equipment for your particular purpose. You can find important information such as capacity and performance specifications, dimensions, weight, electrical data, noise levels, ambient conditions, and safety. In many cases you can also obtain an overview of accessories offering higher capacity and performance.
Struers’ equipment is in conformity with the provisions of the applicable international directives and their appurtenant standards.
Struers’ products are subject to constant product development. Therefore, we reserve the right to introduce changes to our products without notice.
05 มิถุนายน 2561
ผู้ชม 146 ครั้ง